All Products

Our screw thread grid plate 8020 is made from C45/1.1730 tooling steel and thermally stress relived and face milled.Dimensions: 800 x 200 x 20 mmM6 Thread..

Cast aluminium t-slot plate 5050 has a tolerance and precision of +/- 0.01 mm / 200 mm and graded at 5083.With a smooth closed underside the t-slot plate can be suctioned onto a vacuum table allowing the mounting of clamps and vices.To attach to your host machine drill holes at the suitable locations. Need us t..

Cast aluminium t-slot plate 6040 has a tolerance and precision of +/- 0.01 mm / 200 mm and graded at 5083.With a smooth closed underside the t-slot plate can be suctioned onto a vacuum table allowing the mounting of clamps and vices.To attach to your host machine drill holes at the suitable locations. Need us t..

Cast aluminium t-slot plate 8030 has a tolerance and precision of +/- 0.01 mm / 200 mm and graded at 5083.With a smooth closed underside the t-slot plate can be suctioned onto a vacuum table allowing the mounting of clamps and vices.To attach to your host machine drill holes at the suitable locations. Need us t..

Specifications Material: Aluminum External dimensions: 456 x 336 mm Clamping Dimensions: 440 x 320 mm Height: 18mm Spacing: 10 x 10 mm Hose connections: 6 mm standard OD Adapter mat: rubber hole Holes: 0.2 mm through hole Vacuum chambers: 3 Circumferential clamping base Included in delivery: Vacuum table VT4432 smart ..

The 4030 RAL Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the set of connecting hose. Face milled from both sides and fit for use with coolant the RAL Series features workpiece stop collars and makes clamping and milling your workpieces quick and easy. ..

The Professional 4020 kit is ideal for engravers and metal workers. An all-in-one solution with everything you need to start vacuum clamping. Simply connect your RAL Series table to your manifold and Venturi using the hose and then to your compressor. A PVC adapter mat is also included if you want to mill all the way..

The slimline 7050 vacuum table has a height of just 11 mm which allows a minimal vacuum pump requirement whilst maintaining a high air flow over its surface area, achieved with 0.6 mm holes in a 20 x 20 mm grid.High airflow - Due to a height of 11 mm, a 20 x 20 mm grid of 0.6 mm holes our slimline tables have a minimal..

The 3030 GAL Series hole grid vacuum table is of vibration absorbing construction made from 100% cast aluminium. Combined with high stability and switchable vacuum sections the GAL Series vacuum tables can be subdivided into several chambers. The included holed rubber mat ensures a seal around your workpiece with a t..

The 5030 R Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the provided set of connecting hose. Face milled from both sides and fit for use with coolant the R Series is ideal for engraving giving you the ability to clamp and mill your workpieces quickly and ..

Our screw thread grid plate 6030 is made from C45/1.1730 tooling steel and thermally stress relived and face milled.Dimensions: 600 x 300 x 20 mmM6 Thread..

Our screw thread grid plate 9020 is made from C45/1.1730 tooling steel and thermally stress relived and face milled.Dimensions: 900 x 200 x 20 mmM6 Thread..

The KMP diaphragm vacuum pump has an achievable pressure of 150 mbar. Diaphragm pumps have good suction lift characteristics and can handle sludges and slurries with a relatively high amount of grit and solid matter. Their efficiency rating is up to 97%. Specifications..

The vacuum table 5040 SEAL is a further development of its ST Series counterpart. A material of polyethylene plastic is sandwiched between top and base plates of cast aluminium, giving the table additional rigidity. Although best results are achieved using a dedicated vacuum pump the SEAL series can be used with a..

The Professional 4030 kit is ideal for engravers and metal workers. An all-in-one solution with everything you need to start vacuum clamping. Simply connect your RAL Series table to your manifold and Venturi using the hose and then to your compressor. A PVC adapter mat is also included if you want to mill all the way..