MP Series vacuum tables for paper & foils
The MP series are made from metapor and sintered aluminium and are ideal for working with very thin materials.
These tables feature an air-permeable, microporous, sintered aluminium vacuum plate and are completely flat and uniform.
Allowing the clamping of very thin, flexible materials, such as paper and film where a high level of precision is required.
Model: VTDIN-A5-MP
Dimensions: 240.00mm x 180.00mm x 30.00mm
The A5 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 441.60
Model: VTDIN-A4-MP
Dimensions: 330.00mm x 240.00mm x 30.00mm
The A4 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 726.80
Model: VTDIN-A3-MP
Dimensions: 450.00mm x 330.00mm x 30.00mm
The A3 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 1,370.80
Model: VTDIN-A2-MP
Dimensions: 630.00mm x 450.00mm x 30.00mm
The A2 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 2,668.00
Model: VTDIN-A1-MP
Dimensions: 870.00mm x 630.00mm x 30.00mm
The A1 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 5,262.40
Model: VTDIN-A0-MP
Dimensions: 1,220.00mm x 870.00mm x 30.00mm
The A5 MP Series vacuum table is manufactured from microporous aluminium where the metapor vacuum surface is perfectly flat and homogeneous. Ideal for extremely thin materials where very high precision is needed.
Items included
Item
Quantity
..
US$ 10,386.80
Showing 0 to 0 of 0 (0 Pages)
0
3545
Introducing our new slim line vacuum table series with a focus on low cost, high air flow with a minimal vacuum pump requirement. Our most versatile and cost effective vacuum table yet!It's low height of 11 mm and lateral 3D printed port connector se..
0
2564
Whatever you are machining, creating a firm hold on your part is essential to milling with flexibility and precision. Vacuum and mechanical clamping are two of the most common methods used each with their own advantages and disadvantages.Vacuum Clamp..
0
16234
With a substantial choice of vacuum tables it can be difficult to determine which would be best suited for your
needs.
However there are some basic principals that can be applied that should lead you to a conclusion on which type is best suited t..
0
2906
Although it may vary depending on your setup these instructions can provide a rough guide to get you up and running
in no time.
Should you have a specific question not answered here, contact
us or talk to us on live chat.The R Series..
0
14977
Getting the right vacuum pump is essential in ensuring your workpieces are firmly vacuum clamped in place.
The size of vacuum pump required is not proportional to the size of vacuum table.
With the knowledge of your workpiece material and the type of..
